PDA

View Full Version : my golf 1 restoration project


vwmk2driver
08-07-2005, 10:43
Hello men.

november 2004 i buy an vw golf 1, if start this project whit the thougt to total restoration of him.

at the moment i buy the golf was these very bald, the loose parts there were lay well by only in the bus.

i would say look to my project and enjoys
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2331.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2330.JPG

vwmk2driver
08-07-2005, 10:45
As men prevent an updatje.

Have him thus meanwhile almost totally bald gotten and am begun with the building of my topple over mechanism. And the looking up of bad spots.

najah for the rest of the info verify the photograph

http://83.116.179.170/upload/frank/golf1project/HPIM2387.JPG
http://83.116.179.170/upload/frank/golf1project/Hpim2336.jpg
http://83.116.179.170/upload/frank/golf1project/HPIM2386.JPG
http://83.116.179.170/upload/frank/golf1project/HPIM2379.JPG
http://83.116.179.170/upload/frank/golf1project/HPIM2377.JPG

ohjah the previous owner wanted to work see a dent in the dorpel with a dikke layer of sun 7.60 mm plamuur photograph :D
http://83.116.179.170/upload/frank/golf1project/HPIM2374.JPG
http://83.116.179.170/upload/frank/golf1project/HPIM2376.JPG

René
08-07-2005, 10:46
you speak english very well!! :p

cool to post your project in the international section!

vwmk2driver
08-07-2005, 10:47
the text has been translated can via a translator I self namely not yet real angels rene

vwmk2driver
08-07-2005, 10:49
As men.

yesterday the laadste bargain topple over finished is from my mechanism now he totally

today I am begun get get mean radiate by the bald of 1 splash plate + a piece of the bottom, with bare I the tectyl enzo about it off clearly to thus

I am so a little small begun rust spots against come that are arise by diversen factories finished welds.

see photographs

http://www.volksforum.com/albums/files/1/7/4/5/HPIM2450_original.jpg
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2453.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2454.JPG
and I asked myself finished where this support for is.. this sat totally rubbed with that anti stone blow coting


http://www.volksforum.com/albums/files/1/7/4/5/HPIM2455.JPG

vwmk2driver
08-07-2005, 10:52
As men again today (Sunday) again a full day busy been. Am busy been with the bottom bare to get or at least the tectyl end e antisteenslag remove. the tectyl opzich goes is well moooi soft and with a pakking line so way only that antisteenslag is onwijs tough and stretch fixed thus is a whole chore here under again even what photographs

The bottom photograph gives am again till how far I now. just yet an explanation near it the pique black is yet tectyl what I thus not yet done have the brown (dark) its spots where alone tectyl sat has and the light or white spots that has antisteenslag sat with tectyl

http://www.volksforum.com/albums/files/1/7/4/5/HPIM2589_original.jpg
and yes the boss most tired it also but is on :biggrin: ;)
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2590.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2591.JPG

vwmk2driver
08-07-2005, 10:55
As men today a whole day court thus early there out sharpen top with and at the blow.

Am first yet further gone with crabs so the tectyl and anti stone blow layer to remove in the 2de fence. After that this successful wash I am begun remove fence with of outside and fence in. As you know were thus the screens not good joined usual bless there over away joined thus now the loose afgeslepen and the old screen had been pulled. looked back to see to that I so little possible must verlassen just now by the new edges.

I would say verify the photographs the being there enough: biggrin:

this came thinks is I thus against under the antidreun low you thus the bottom hard but then you get this: biggrin:


http://www.volksforum.com/albums/files/1/7/4/5/HPIM2594.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2595.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2599.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2601.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2602.JPG
and the old plate on the dorpel away gotten that there on baked was ;)
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2603.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2604.JPG
the old screen edge removed rechst:biggrin:
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2607.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2610.JPG
left edge
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2612.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2613.JPG
within screen away get
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2616.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2618.JPG

vwmk2driver
08-07-2005, 10:59
sorry as the intentions structure totally corect I am not am have let translate for want to let see very bad in angels him thus it also the foreigners just

arnus71
08-07-2005, 12:00
It is not to be followed almost! Well amusingly to read!

Black Devil
08-07-2005, 12:24
Haha, nice project.

just post the pics ;)

froggy
08-07-2005, 14:12
just keep on posting and if there´s anyone who has a problem, he´s got to ask and we will try to explain :D

Marcski
08-07-2005, 16:27
this still is the international section, so we expect you to speak english here, even if it is crap ;)

PerL
08-07-2005, 22:32
-white pinkers
-white behind

What the fuck? :D I love Babelfish :D :D

Seriously, cool project, and not that hard to understand what you mean. Respect for bringing this to us when you dont know a word in English! Cool project as well!!!

And to give you guys a laugh right back, here's "my" translation :D

Ernstig, koel project, en niet dat hard om te begrijpen wat u bedoelt. Eerbied voor het brengen van dit aan ons wanneer u dont een woord in het Engels kent! Koel project eveneens!!!

I dont know shit if that is correct or not :confused: :D

vwmk2driver
09-07-2005, 08:58
What the fuck? :D I love Babelfish :D :D

Seriously, cool project, and not that hard to understand what you mean. Respect for bringing this to us when you dont know a word in English! Cool project as well!!!

And to give you guys a laugh right back, here's "my" translation :D

Ernstig, koel project, en niet dat hard om te begrijpen wat u bedoelt. Eerbied voor het brengen van dit aan ons wanneer u dont een woord in het Engels kent! Koel project eveneens!!!

I dont know shit if that is correct or not :confused: :D


The through you written text do not knocks in the english well can well angels read but marriage write. Only in dutch, it stand will have also whole odd words so you this also well in the english.

vwmk2driver
29-12-2006, 13:00
the time's fly and i have an hope work move.

look and enjoys the photographs,explanation about the pictures comes yet

http://www.volksforum.com/albums/files/1/7/4/5/HPIM2743.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2745.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2747.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2768.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2769.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2770.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2918.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2919.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2921.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2920.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2922.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2923.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2924.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2925.JPG http://www.volksforum.com/albums/files/1/7/4/5/HPIM2926.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2928.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2931.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2932.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2933.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2936.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2951.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2953.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2957.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2958.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2959.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2960.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2961.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2962.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2963.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2967.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2976.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2977.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2978.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2973.JPG
http://www.volksforum.com/albums/files/1/7/4/5/HPIM2974.JPG
http://img486.imageshack.us/img486/7510/3juni2006001rd5.jpg
brake parts from a opel monza whit 60mm piston's at my original vw gti brake disk
http://img429.imageshack.us/img429/4842/3juni2006002kx1.jpg
http://img429.imageshack.us/img429/136/3juni2006003zm6.jpg
http://img486.imageshack.us/img486/111/3juni2006004hv4.jpg
http://img486.imageshack.us/img486/120/3juni2006005bf8.jpg
http://img486.imageshack.us/img486/5585/3juni2006007ex1.jpg
http://img486.imageshack.us/img486/7224/3juni2006010wy7.jpg

vwmk2driver
29-12-2006, 17:56
http://img71.imageshack.us/img71/5043/oktober2006017ih8.jpg
http://img71.imageshack.us/img71/1130/oktober2006018am7.jpg
http://img235.imageshack.us/img235/4632/oktober2006019ah3.jpg
http://img74.imageshack.us/img74/6916/oktober2006020ij2.jpg
http://img136.imageshack.us/img136/7864/18112006008mb9.jpg
http://img455.imageshack.us/img455/4879/18112006009fh9.jpg
http://img54.imageshack.us/img54/5048/18112006004kt3.jpg
http://img54.imageshack.us/img54/275/18112006005sb6.jpg
http://img54.imageshack.us/img54/5208/18112006006vo3.jpg
http://img455.imageshack.us/img455/3708/18112006007hr1.jpg
http://img234.imageshack.us/img234/6082/18112006010xm5.jpg
http://img77.imageshack.us/img77/4117/18112006011dp7.jpg
http://img364.imageshack.us/img364/7666/06122006009ud2.jpg
new parts, polyutheraan bushes.
http://img208.imageshack.us/img208/6921/06122006007ve4.jpg
http://img292.imageshack.us/img292/4489/06122006004uv1.jpg
new 280mm brake disk
http://img292.imageshack.us/img292/9281/06122006005nu0.jpg
http://img465.imageshack.us/img465/5020/06122006001sf9.jpg
http://img167.imageshack.us/img167/5936/06122006002zn7.jpg
http://img167.imageshack.us/img167/6849/06122006003ys4.jpg
http://img247.imageshack.us/img247/5691/12122006001iy9.jpg
http://img293.imageshack.us/img293/6303/12122006002it9.jpg
http://img72.imageshack.us/img72/1938/12122006003yl8.jpg
http://img300.imageshack.us/img300/1439/12122006003zm8.jpg
http://img63.imageshack.us/img63/5733/hpim2376zy7.jpg
http://img450.imageshack.us/img450/5547/21122006001zi3.jpg
http://img450.imageshack.us/img450/7717/21122006002oj9.jpg