WTB: mk2 diesel instrument cluster w/ tach, kmh

[vw_dick]

for a 1.6 td

need tach

needs to have kmh speedo

need it shipped to canada

email: clone_number2 @ dccnet.com

[PeterZ]

Do you need it with 1 or with 2 plugs?

[vw_dick]

good question - i don't have a clue!

how would i be able to tell?

i have an 80 rabbit 1.5l diesel waiting for a 1.6l td swap. i have the motor/turbo & some other parts waiting to be rebuilt to go into the rabbit. i also have the mk2 dash & i know that i'll need a mk2 1.6l td cluster. i'm not sure if i will even use the guages, as i'll need to add a few more & may just use the electronics from the cluster to hook the drivetrain to the new guages in a homemade cluster similar to one a friend made for his car. but i may not add all of the required guages right away (egt, a/f etc) & thus may run the stock cluster & low-no boost during motor breakin etc etc so it'd be good to have it in kmh vs mph. (speedo)

annnnyways - i'll ask around & find out how i'll be able to tell whether i need 1 or 2 plugs. :confused:

[vw_dick]

my mistake - turns out i don't need one.

i thought i had to have one for it's electronics to plug aftermarket guages into, but i've since learned that the aftermarket guages come with sensors that're plug'n'play on the motor etc.

[RubenD]

Well your "lucky" then. Dunno if I would be so happy with that. I rather would do testruns with the original clocks first and when your sure switch them for aftermarket.

And for buying stuff like that I would suggest using Ebay, just perfect for that!