View Full Version : Type 1 -68: Old, Low & Damn Slow. Norwegian Project
Hi guys,
I wanted to share my project with you all :)
This is a short version of my ongoing project so far...
This is my second Air Ride project. I think you all remember my old project ;)
http://vagner.jeje.je/bilder/albums/album17/bugrun22.jpg
http://vagner.jeje.je/bilder/albums/album17/bugrun23.jpg
So.. whats happening now?
Well early last year I came over a very good 1968. The only rust I found was around the jackmounts. :D
But the enginebay didnt look to good :( FIRE!
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0001.jpg
After some hours work the engine looked a bit better and it worked like a charm. This season I am going to use this engine but I have planned to build a new one next winter.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0045.jpg
This is the car BEFORE I started my air ride project.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03601.sized.jpg
So.. whats the plan? Primer & Chrome!
http://vagner.jeje.je/bilder/albums/68_Type1/boble.sized.jpg
I am going for a RESTO/ROD look. The body is going to be painted with gray primer. The wheels will be painted with red primer....and all the chrome --> Smoothie hubcabs, fender trim, mouldings, bumpers etc.
Wheels? 4,5" steel in front and 8" widen steel in the rear.
Tires? 135 in front and 185/60 in the rear.
Whats happend so far?
Two boxes with "joy" from Pete :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0355.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0360.jpg
Bodylift in November:
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0382.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0385.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0394.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0404.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0405.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0425.sized.jpg
Then the fun started :)
Narrowing my beam 4":
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03745.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03749.sized.jpg
Sandblasting:
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03759.sized.jpg
Rear mounts:
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03776.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03780.sized.jpg
Fixing the only rust :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03793.sized.jpg
Thats the short version. Now I`ll keep this thread up to date :D
Shaving :)
Tonight I started shaving the front fenders and doors.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0031_001.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0042.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0044.sized.jpg
Finished :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0034.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0050.sized.jpg
I am going to install door poppers so let`s shave some more ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0051.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0054.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0057.sized.jpg
It took some time to make the sheetmetal fit perfectly, but it turned out pretty good.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0066_001.sized.jpg
Welding finished. One door to go.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0070_001.sized.jpg
More parts :)
This arrived from the states..
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0027.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0033.sized.jpg
"Poppers" and remote
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0029.jpg
"Heavy duty" solenoids
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0032.jpg
Saturday update :D
Finished sandblasting and primer today
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03839.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03840.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03841.sized.jpg
*Update* The wheels are back :)
I got my wheels back.. going wiiide :D
They are now 8x15"
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0022.jpg
125mm ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0019_001.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0001_004.jpg
looks like that's going to be one hot ride.. the ingredients are good, so start cooking ;)
if this thing is going to get as close to ultimate coolness as your cabbie, you'll beat Boy George in my list of favorite people.
Flipped the pan and started working on this side. It's just brown not any bad rust.. but still a job to do.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0008_001.sized.jpg
My front and rear wheels... see any difference ? ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0004.jpg
More parts arrived
Another big shippment from the states
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0007.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0009.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0011.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0014_002.jpg
No rust at all :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0005.jpg
Primer done :) Ready for paint
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0013.jpg
First coate with paint
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0005_001.jpg
Even more parts :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0001_006.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0006.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0008_002.jpg
Started working on my transmission tonight.
This is what it looked like
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0394.jpg
After some hours with cleaning and grinding
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0009_001.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0010.jpg
Going to sandblast the rest
Finished sandblasting all the parts
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0004_001.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0007_002.sized.jpg
The wheels..
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0008_003.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0009_002.sized.jpg
First coate of primer
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0015_001.sized.jpg
I got new ball joints so I'm going to change them after paint
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0016.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0017_001.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0018_001.sized.jpg
Transmission and starter
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0019_002.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0022_001.jpg
More primer :D
Ready for paint
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0003_002.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0006_001.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0010_001.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0013_001.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0016_001.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0017_002.jpg
Forgot some parts )
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0017_003.jpg
Last coat with primer on the wheels (they are going to look like this..)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0002_003.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0007_003.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0005_002.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0015_002.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0016_002.jpg
Mmmmmmmmmmmmmmmmmmmmmmmmm :D :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0007_004.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0015_003.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0004_003.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0005_003.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0017_005.jpg
Woohoo
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0016_003.jpg
Tonights update
Got the last parts for converting to shirt axels
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0048.jpg
Needs some blasting and paint :)
Last coat with black paint
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0045_001.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0032_001.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0029_001.jpg
FINALLY!!!!!!!! :D
NOW.. we're up to date :D
Wow that looks super!
Keep up the good work.
damn.. those wheels look good!
wow looks amazing! really good job.
Why using a ball joint beam ??
Everybody knows that a link pin axle will give you more drop without the risk of knocking down
the BJ's and -worsed case scenario- crashing the car.
I liked your Mk1 convertible very much, but I don't think you will turn more heads with the beetle.
Why using a ball joint beam ??
Everybody knows that a link pin axle will give you more drop without the risk of knocking down
the BJ's and -worsed case scenario- crashing the car.
I liked your Mk1 convertible very much, but I don't think you will turn more heads with the beetle.
I use long travel ball joints and drop spindles. The pan hits the ground before the ball joints stops.
I also flip the tie rods so make sure that I don't get a steer lock while driving.
I know that my old MK1 got more "WOOOOW" than this project.
But I still think the result for me will be the same.. I got the car just the way I want.
The look of the beetle will be more raw/brutal than the KL-EEN 1 project ;)
WOW, glad you're back in business mate..
WOW, glad you're back in business mate..
Thanks :thumbup:
WOW, glad you're back in business mate..
good thing you revived his cabbie topic.. i bet he forgot all about us ;)
JettaPowerrr
26-02-2008, 15:13
:D SWEEEEET! :thumbup:
My TRUE passion is air-cooled
But why a beetle ?? :dunno:
VW made more intresting models then the beetle you know ;)
Yeh, Area51 has a nice 412 for sale.... ;)
Berserker
26-02-2008, 15:47
Yeh, Area51 has a nice 412 for sale.... ;)
Yeah Baby, talking about some cool air-cooled models... Beatles made music, not ment for the road without a sqaushing sound... :redface:
Tonights update
Finally the fun started! :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0004_004.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0005_004.jpg
Bad picture.. :(
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0010_002.jpg
that's looking good, you already did some serious work on the beetle!
nice that you keep us posted with pics, we like people that really work on their cars, and post pics you know! :D
Tonights update
I spent some hours in the garage tonight. And got a lot done :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0003_003.jpg
Transmission, bags, käfer cup bar etc. in place.
I think the result was pretty ok :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0004_005.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0006_003.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0011_001.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0022_002.jpg
Maykel1986
27-02-2008, 23:53
wow!! this is really nice work :thumbup:
Love the steelies and all the nice parts you are mounting at the moment!
Damn, that a sweet project....!!!
Gr Lars
*Update*
Tonight I changed all my ball joints with the "long travel" that I got with the air ride.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0010_003.jpg
Blasted the "new" short axel tubes end prepared them for primer.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0002_004.jpg
Two coats later with primer..
Ready for black paint tomorrow :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0013_002.jpg
robertjan007
28-02-2008, 22:59
Damn man... It make's me very very happy!!! What a nice project!
Good Luck
*Update*
Completed my transmission today.
Converted to short axels, new bearings etc. :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0014_005.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0013_003.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0012_002.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0008_005.jpg
*Update*
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0012_002.jpg
Looks very nice.
But there is one thing you should change. The bolts on the rubber that's mounted on the axles and the gearbox should be pointing to the back or the front. The way they are sitting now, they will screw up the rubber, each time your suspension will go up and down. ;)
Looks very nice.
But there is one thing you should change. The bolts on the rubber that's mounted on the axles and the gearbox should be pointing to the back or the front. The way they are sitting now, they will screw up the rubber, each time your suspension will go up and down. ;)
I have changed that allready ;)
steven16v
02-03-2008, 18:11
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0007_004.jpg
Damn that looks hot!
A very nice project! Good luck with it!
*Sunday's update*
It sonny day in Oslo today, but I desided to spend the hole day in the garage :)
New breaks, incl. new emergency brake cables.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0008_1.jpg
Completed the Air Ride @ the rear.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0012_003.jpg
I also had to "try" this one, EMPI shifter :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0018_002.jpg
Before I closed the garage I started on the front suspension.
Removed all the caps.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0014_006.jpg
To be continued....
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0007_004.jpg
Damn that looks hot!
A very nice project! Good luck with it!
Wait till you see them on the car with the tires ;)
*Update*
Spent some hours in the garage tonight after work :)
I continued with my front suspension. Used the grider to get a flat surface for the big washers.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0032_002.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0035.jpg
Got most of the grease out of the suspension, but to be on the safe side I taped the end so I didn't get any grease inside the replacement bar.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0028.jpg
Both inserts in place..
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0031_002.jpg
After some work with the "Dremel" I got the prefect fit for the washers :D
There will be a little special bearing between the big washers, but I need to buy some Locktite before I tighten the bolts.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0047.jpg
Voila..
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0044_001.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0042_001.jpg
*Update*
Bought some Loctite yesterday and was ready to complete the front suspension
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0003_004.jpg
Installed those strange bearings between the washers. I added some grease on the bearing before I installed the bolts.
Used the Loctite on all 4 bolts to be sure that the suspension don't collapse :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0006_004.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0008_007.jpg
Everything in place.. :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0011_003.jpg
Then I installed the Air Shocks in front. I have to drill som bigger holes in the spindles before I install the drums and breakes.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0016_004.jpg
*Update*
Last night I drilled new and bigger holes in my drop spindles and installed the flip rod kit. I am flipping the outer tie rod upside down to get a better angle when the car is so loooow ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0011_004.jpg
The kit is installed like this..
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0001_007.jpg
Ready for installing breaks etc.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0012_004.jpg
I needed to modify my rear drums after converting to short axels
http://vagner.jeje.je/bilder/albums/68_Type1/IMG_0004.jpg
And here's the result... :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0015_004.jpg
*Friday update*
I am now ready to install the wheels and drop the car to the ground :D
Need the finish the wheels this weekend so I can get some tires on them next week.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0020_002.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0019_003.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0016_005.jpg
*TOUCHDOWN*
http://www.atwillett.com/photojournalism/game_winning_touchdown.jpg
I had to find out how low the car is now, before I get the tires. So after finding the right height of my tires, I made some temporary ones ;)
A BIG smile in my face when this happend. And I still got more travel in front :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0022_003.jpg
30mm clearence @ the edge...
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0028_001.jpg
And @ the rear. 8 inches of pure rawness :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0014_007.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0027_001.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0036.jpg
wow, touchdown is right,... this thing is gonna be insane.
i thought load adjusters were supposed to be used in combination with ordinary suspension and not carry the entire load
don't you think the vents will be too small (read slow airride)?
i thought load adjusters were supposed to be used in combination with ordinary suspension and not carry the entire load
don't you think the vents will be too small (read slow airride)?
This isn't ordinary load adjusters/hijackers. These are air shocks which replace both the shock and the spring. I had the same type of air shocks @ the rear on my Golf 1 Cab project. Working like a charm en carries the weight without problems.
I haven't bought a fast kit... I am not going to stand beside my car at the shows and "wiggle" and jump. I have installed the ride to be able to have my car extremly low, but still be able to raise it if can't get over something.
Insane! Mad props yo :D
Interesting front airbags/springs/shocks, where did you find those? Would be usefull on various cars...
Insane! Mad props yo :D
Interesting front airbags/springs/shocks, where did you find those? Would be usefull on various cars...
I bought the complete Air Ride from Airkewld in the US.
This isn't ordinary load adjusters/hijackers. These are air shocks which replace both the shock and the spring. I had the same type of air shocks @ the rear on my Golf 1 Cab project. Working like a charm en carries the weight without problems.
I haven't bought a fast kit... I am not going to stand beside my car at the shows and "wiggle" and jump. I have installed the ride to be able to have my car extremly low, but still be able to raise it if can't get over something.
:thumbup:
just wondering, cause they look exactly like em, even the nozzle..
:thumbup:
just wondering, cause they look exactly like em, even the nozzle..
That's not a nozzle.. it's the protection cap ;) :)
i know that, i meant the size of the nozzles
i know that, i meant the size of the nozzles
Ahh.. k :D
...5...4...3...2...1....LIFT OFF :D
No updates for some days. Got the flu :(
Anyways.. I had to do something in the garage so last night I hooked up the rest of the Air Ride and was able to test it :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0072_001.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0080_001.jpg
Temporary install. All these parts are going to be installed under the hood in front.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0073_001.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0074_002.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0076_001.jpg
After connecting the battery I was ready for the first "test drive". Everything was working 100% and no leaks :)http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0071_001.jpg
Slammed it is laying flat on the ground (physical) and on top I got 23cm under the car. That's what I call a DROP, baby! :Dhttp://vagner.jeje.je/bilder/albums/68_Type1/DSC_0079_001.jpg
So, when I get rid if my flu I will get some tires on and be able to test it even more.
And best of all, finally get started on the body.
Beetlefreak
12-03-2008, 21:36
One of the best projects at the moment here! Keep it going, looking really good!! :thumbup:
One of the best projects at the moment here! Keep it going, looking really good!! :thumbup:
Thanks, mate! I'll do my best :D
you make it look too easy... can't wait till the bodywork starts...
eiriksmil
15-03-2008, 03:22
This is wicked, fresh frames and bags, what more can you ask for? :thumbup:
*Sunday update*
It was a sunny day in Oslo today so I wanted to spend som time OUTSIDE the garage for a change ;)
Started to work with the body. Almost no rust here either :) SWEET! :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0097.jpg
This isn't to bad for a car that haven't been restored since it was new in 1968 ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0098.jpg
Inside.. only some surface rust.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0099.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0100.jpg
very nice for an unrestored car,... where do you still find stuff like that...
what are the plans?
very nice for an unrestored car,... where do you still find stuff like that...
what are the plans?
Had some luck I think :)
I'm going to sandblast the parts of the body that got some surface rust.
Then I'm going to sand it down and give it some coats of primer, with a little twist. ;)
not black i hope.. too many of those around already... then again.. not on airride
Please Not Black!!!!!!!!!!!!!!:)
Relax guys :D It is NOT black. As mentioned in this thread it is going to be painted with grey primer, but I have something up my sleeve ;)
Holy shit, that bug is in excellent condition!
Holy shit, that bug is in excellent condition!
Yepp :D Pure joy working on it. It isn't much work with rust on it, but I have some hours of modifications ahead of me ;)
screwloose
19-03-2008, 22:42
interresting topic!!
i wonder where to get those front shocks!
but to be onest, the DO look like monroes!
Update - Finally out of the garage :)
Today I could push the car out of the garage so I could clean up the garage after working there all winter.
It is kinda low, even with the 80-profile tires ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0104.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0108.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0111.jpg
Tomorrow I'm gonna work with the body. Remove windows, rear fenders etc.
still snowing upthere? damn... i hate the cold.
still snowing upthere? damn... i hate the cold.
Ohh yeah :( Grrrrrrrr
It came 20cm yesterday :( I thought the winter was over.. but hell no.
But as you can see most of it vanished through the day.
well.. no 20cm here... but all of a sudden we're back in the snow too
http://www.volksforum.com/albums/files/7/Img_5771.jpg
Update
Today I tried on the body before I start working on it.
I had to check if I needed some modifications after the chassi-rebuild.. and yes, I need some mods ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0110_001.jpg
After narrowing the frontsuspension 4" the strut towers touches the body.
I suspected this before lifting the body, even if the word on the street says you don't have to if you "only" do the 4" beam.
No biggy.. small mods needed.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0107.jpg
I also need to modify the rear to be able to mount the body without removing the cup-bar. Also i minor modification :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0102_001.jpg
The body is "hovering" 8cm over the chassi..hehe
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0114.jpg
So... you need to add a 8cm drop to this (+ 3cm drop with the right tires)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0113.jpg
..and 3 cm additional drop (+2cm drop with the right tires) in front
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0115.jpg
I didn't get the right look and feel but I was able to measure everything I needed before starting with the body.
Let the bodywork start :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0117.jpg
*Big update*
A lot was done this week. Started working on the body.
Still looking good, but I found out that the left rear corner has been changed.
It was not 100% in place so I am going to change both corners and the rear panel.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0107_001.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0110_002.jpg
I also found this. Previous owner had tried to hide this under some paint :screwy:
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03860.jpg
Friday the parts I ordered from California wednesday arrived. Pretty fast delivery to Norway as always, 3 days!! :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0102_002.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0103_001.jpg
Yesterday I cut out all the rust from the channel. Luckely the heater channel was as good as new :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03862.jpg
And after som work it was finished :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03864.jpg
Also started on the rear. Cut out the rear panel...
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03871.jpg
As you can see, the right corner wasn't to good :redface:
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03874.jpg
The first corner changed and this time it's where it should be. It was a helluva job to get it right *puuh*
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03916.sized.jpg
And today everything was in place and the rear complete again
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03896.jpg
As you can see, I also got my new bumpers today :)
I am going to modify the brackets a bit, more info 'bout that later. ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0107_002.jpg
Then I started cleaning this :D Almost ready to weld it in place.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03901.sized.jpg
First layer with bondo..
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03909.sized.jpg
That's it for today. I'll continue working with this tomorrow...
http://vagner.jeje.je/bilder/albums/68_Type1/DSC03914.sized.jpg
LOL, typical beetle.. even the best ones have all kind of surprises hidden..
Racelook
30-03-2008, 21:01
Nice :D
Wiebrand
I see that the Dollar value is also good in norway:);)
I did a porsche 912 last month and it was cheaper to get parts from the US than from annywere else.
I see that the Dollar value is also good in norway:);)
I did a porsche 912 last month and it was cheaper to get parts from the US than from annywere else.
Ohh yes. I have bought all the parts for my project @ CIP1 in California.
Saved A LOT of money!!!
LOL, typical beetle.. even the best ones have all kind of surprises hidden..
Jepp :) They do.
Some of it is because of bad repaires from previous owner.
Anyways.. now everything is gone and good shape again. ;)
Nice work, nice work! I still think that is one excellent Bug body, I've seen FAR worse and considered them 'okay' :)
Dollar rate is bliss, my eBay account is redhot :tounge:
Workin' in the sun :D
Sunny in Oslo this weekend. So I took the car out of the garage and worked outside instead of inside the garage.
Started working on my inner arches in front. Need some more space for the front suspention after narrowing it.
Instead of just cutting out a part I sliced it and hammered it in shape. This is a picture early in the process.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0123.jpg
Gasfiller finally gone. Last layer with bondo is on. Finito baby! :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0124.jpg
Started some cleaning of useless holes in the inner arches :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0128.jpg
Then some REAL fun. After modifying the inner arches etc.. I was ready to try on the body again. I had a BIG smile in my face when I sat down behind the car an saw this FAT ass!!!!!!! YEEAH BABY!!
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0103_002.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0104_003.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0105.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0111_001.jpg
Still, the car will be a bit lower with the correct tires.. :)
oh my.....
So.. you like it? heheheh
I can't wait to get my tires and white sides on :D
Mk1-Addict
13-04-2008, 12:27
REALLY love this thread, do enjoy your work! First saw your work lowering your cabbie, man you don't do things halfway :wow:!
I am currently also installing air in my mark 1 convertible, if you like you can see some pictures at: http://www.golfcabrio.com/viewtopic.php?f=25&t=21157. For more pictures go to mijnalbum.nl: http://www.mijnalbum.nl/Album=BX78XOAM.
Keep up the good work, I only have one complaint: you have us waiting for pictures for more than a week now, this is not acceptable :D
*Update*
Well guys, here's some pics from the last week.
I was supposed to paint the car inside this weekend but I was so damn busy at work so I got a bit delayed :(
But, now it is ready for some paint tomorrow :D
I need to mask the windows etc. and then I'm good to go..
I am almost ready for the paint outside. Just need to modify the bracket holes for the bumpers ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0111_002.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0109.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0110_003.jpg
Tested some chrome for my steering wheel, but it didn't fit.
So tomorrow I have to hunt down a correct steering wheel. ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0115_001.jpg
I ended the evening by doing some mods to my speedo. This is the original..
and tomorrow morning I will post the result ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0123_001.jpg
..as promised ;) :D Details, details, details...... same color in the speedo as on the wheels etc.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0130.jpg
wow, that looks almost stock...
wow, that looks almost stock...
Yepp :)
And then it is a success. I think that when you do a modification, ordinary people shouldn't see any difference, but entusiasts should see/feel that something is done. ;)
I got some more mods like this so just stay tuned ;)
FINALLY PAINT!
I finished the first two layers with primer tonight (inside the car)
Very pleased with the result. I took some time before I got the perfect roughness in the primer. Correct mixture of paint/thinner and adjustment of the paint gun.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0153.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0146.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0147.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0152.jpg
ooooohhh you textured it.. almost bedliner like..
ooooohhh you textured it.. almost bedliner like..
Not that much, but it is kinda ruff ;) Just the way I want it.
I KNOW that I will get a lot of comments from the show`n`shine people, but I can`t care less ;)
I know that the result will be a fat ride :D
*Update*
Last layer of primer inside the car tonight.
So.. a little "sneak peak" mates??? ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0158.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0172.jpg
The "total picture" looks great!
Get to work!!!! Don't keep us waiting any longer :)
Awesome work, love it already :thumbup:
Get to work!!!! Don't keep us waiting any longer :)
Awesome work, love it already :thumbup:
I have a day off from work tomorrow, so I will be in the garage 8 o'clock in the morning ;)
And tomorrow I am starting outside the car.
Great fun with all you positive feedback guys :D It gives me an extra gear..!
*Update*
A LOT of work was done on the car today. The car is now sanded and ready for paint. Just have to sand the last bondo tomorrow.
I also sandblasted the engine bay after the fire. I thought it was much more work, but it wasn't so bad after all. :D
I put primer on all the inner arches and the backend of the car.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0174.jpg
Before I closed the garage for tonight I sprayed the last layer of paint on the wheels. :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0179.jpg
FINALLY! WHEELS, BABY :)
I think this will be AWSOME on the car :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0003_005.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0002_005.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0005_005.jpg
Mmmmmmm
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0007_005.jpg
195/65-15 on 8".
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0008_008.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0001_008.jpg
Looks great :rock: :rock:
Berserker
18-04-2008, 09:36
Beautifull ..... :cool:
wow dude
that car is awesome!!!
Phat boiii
I mounted the wheels on the car tonight. *BIG SMILE*!!
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0026_001.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0011_005.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0028_002.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0018_003.jpg
..and with the correct tires, touchdown! :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0015_005.jpg
YOU GOT CAMBER???
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0023_001.jpg
Not much on the ground.. hehe
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0021_001.jpg
Got the new steering wheel tonight. Allready sanded and primed as we speaks.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0010_005.jpg
what brand tyres are on the front? look like the ones fitted on 2CV's
what brand tyres are on the front? look like the ones fitted on 2CV's
Front: 135s on 4,5"
Rear: 195/65s on 8"
*Update*
Last night I sprayed the last layer of bondo. Going to sand this today and the car is then ready for paint tomorrow.
I got two days off at work now so I will get a lot done ;)
More chrome trim is installed on the dash. Around the speedo.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0004_008.jpg
Did some more "color coding" ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0013_004.jpg
And another little Køstom "thing"....
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0012_005.jpg
Hmmm.... what's happening..??
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0011_006.jpg
I give you.... the Apple ashPod :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0007_007.jpg
Of course in the same rust red color. It is a PERFECT fit inside the ashtray.
Had to do some minor modifications to make it fit.
The 60Gb ashPod'en will be connected to a 4-channel amp and a hidden front system and a subwoofer.
that is SOOOOOOOOO cool.. love the detailwork
nice fit! only no charging..
nice fit! only no charging..
Ohh yes, I got charging. Modified cabel ;)
Well guys. Tomorrow is the day.. the car is ready for the paint booth :D
Worked on the car the hole day and I will start shooting primer tomorrow morning.
Before I quit tonight I painted and assembled my steering wheel. :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0023_002.jpg
Stay tuned!
Berserker
24-04-2008, 08:11
Lovely... :thumbup:
Ohh yes, I got charging. Modified cabel ;)
:thumbup:
Ok, folks. A lot of progress with the car. Almost finished painting the body.
I am not going to show the hole car before all details are done. But here's a sneak peek of one of my "secrets" ;) More to come, so just stay tuned ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0055_1.jpg
You got camber??
Mounted the body again today. It was very exciting to see how the stance for the rear was with the new tires.
So after I bolted on the rear fenders and installing the compressor and air tank, I was ready to drop this badboy.
I tried on some old front feders because the one's I'm using is bare metal at the moment.
And I was EXTREMLY happy with the results, no modification needed, and I got a 3-4mm gap between the tires and the rear arches.. PERFECTO!!! :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0008_009.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0007_008.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0009_004.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0010_006.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0011_007.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0012_006.jpg
The front fenders are 10mm from the ground. ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0014_009.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0015_006.jpg
steven16v
27-04-2008, 18:34
Nice!!!
knarfmk1
29-04-2008, 12:07
thats PHAT!
looking forward to when its finished!
Time for an update again guys :)
It actually looks like a car again.. hehe Almost finished with bondo and sanding now.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0002_008.jpg
Shaved, baby, shaved..
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0011_008.jpg
The hood is finished and in place
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0016_008.jpg
Modified the door and the peep mirror... perfect fit :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0020_003.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0025_001.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0028_003.jpg
*Update*
I have been working on the air control lately.
Not finished...
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0003_008.jpg
Stripped the engine and did some cleaning. A lot of work but I'll think the result will be ok.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0014_011.jpg
A BIG shipment from the states arrived today.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0001_012.jpg
Some goodies..
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0002_009.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0003_009.jpg
More...
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0004_011.jpg
Sebring sports exhaust to give the engine some sweet noise this season
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0005_007.jpg
More engine parts and J-tubs
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0007_009.jpg
G-Caps... red of course
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0008_012.jpg
New rust red door panels http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0009_006.jpg
After some hours in the garage today the engine is almost done.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0001_013.jpg
Recap.. it looked like this after the fire :O
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0026.jpg
Tiefleger
19-05-2008, 20:21
Very, very, very, very nice.
René (Tiefleger)
I cant wait to see the end result
keep up the good work
What a great project, didn't noticed it before, but now it's my favorite! :thumbup:
Keep on the incredible good work!! :D
Greetz Rob :cool:
lookin' good! keep up the pace, i really want to know what this thing is going to look like. great job!
Got my batteries today. I am going to mount two them under the backseat.
One for the starter and door poppers, and one for the air ride etc.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0001_015.sized.jpg
Yesterday I got the dual battery isolator.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0001_014.jpg
The engine is now assembled and I only need to connect all the hoses.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0006_008.jpg
a.busser
27-05-2008, 17:44
Sweeeeeeeeet !
martijnvanderh
27-05-2008, 19:54
hotttt!
Installed the engine last night. Without a scratch *puhh* :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0007_010.jpg
The time is running from me guys. I am supposed to be finished with this car for Bug Run i Mantorp/Sweden, which is 6-8 of June :o
If all parts arrive in time and nothing is happening I THINK I am going to make it ;)
I also ordered a upgrade of my air suspension some days ago.
5 gallon tank (the one I got is 2 gallon)
http://www.suicidedoors.com/images/products/Black5Gallon8Port.jpg
Two Viair 380 Chrome compressors (got one 280 Chrome today)
http://www.suicidedoors.com/images/products/Viair380DualPackChrome.jpg
Stay tuned!
The time is running from me guys. I am supposed to be finished with this car for Bug Run i Mantorp/Sweden, which is 6-8 of June :o
oh...., then you have very little time, but looking at the progress you already made, you'll gonna be fine! :thumbup:
Good Luck!! :cool:
Greetz Rob
I didn't make it to Bug Run (with the car). Got some problems before paint with the last layer with filler :(
Today the new parts for the air ride arrived :) 30 kilos of pure fun ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0015_007.jpg
Drag blocks! Heavy duty style for use @ mini trucks
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0019_004.jpg
Suicidedoors thought that I was going to use this parts on a mini truck...
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0024_002.jpg
5 gallon tank and 2 x Viair 380 Chrome..!
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0030_001.jpg
The tank was WAY bigger than the old one. I didn't think it would fit, but hell yeah! FIts like gloooove ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0034_001.jpg
FIts like a gloooove ;)
http://content9.flixster.com/photo/31/78/84/3178847_gal.jpg :thumbup:
Finally. Installed the new tank and compressors tonight. Working like a charm!
Much better response from the system and I am able to raise/drop 4-5 times before the compressors starts. Earlier I was just able to do this 1.5 time.
Allroad edition
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0029_002.jpg
Ass up - nose down
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0030_002.jpg
All slammed
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0031_004.jpg
damn!! that shit is wack!! nice job. looking forward to see the car when it's finished
onemirrorman
21-06-2008, 09:47
Superb! This car is going to be a awesome ride.
Keep up the good work (and posting).
i expect this to be finished by now
Just wanted you to know... I am back in action ;)
After a long break I finally got time to continue the project.
I ordered new lower tires and white walls yesterday. That will give me additionaly 30mm of drop in front and rear. Think that will be pretty awsome.
I got a guy working on a CUSTOM front suspension for the bug, including a dual bag setup.
It will be a new customized version of his racing suspension..
http://www.are-inc.org/bubbla/projekt2/2.jpg
Untill then I am going to do some tiny modifications to my ball joint. Today the suspension is on the ground, so I need to make some "room" for the extra drop from the new tires.
Thinking about shaving off these parts and weld it.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0015_008.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/Frame_Head_before.jpg
Beetlefreak
04-09-2008, 19:06
I got a guy working on a CUSTOM front suspension for the bug, including a dual bag setup.
It will be a new customized version of his racing suspension..
http://www.are-inc.org/bubbla/projekt2/2.jpg
This front-end suspension is so freakin´ nice :rock:
Read an article about it in the Ultra VW, it's so much better then the usual frontbeams.
Add dropped spindles to it and your bug is a shovel :D
This front-end suspension is so freakin´ nice :rock:
Read an article about it in the Ultra VW, it's so much better then the usual frontbeams.
Add dropped spindles to it and your bug is a shovel :D
It's not the same suspension as in Ultra VW, I saw that too. But the concept is the same.
He's designing a new version for me as we speaks. The new is going to be narrowed and got dual bags.
Hey guys!
A little update regarding the new suspension.
As we speaks the design of my new front suspension is almost done.
This will be a dual bag (and possible a center mounted shock) suspension with awsome travel :)
I want to achive two things with a new suspension.
- Awsome suspension travel which will make it possible to REALLY lay "frame"!
- Improved handling/steering.
So, køstom suspension here we come ;) The A-arms are made in aluminium.
Got the "almost ready" drawings from the designer today. It seems like the suspension is going into production soon.
If everything goes by the book it is possible that the suspension is installed late october ;)
http://are-inc.org/frontsus/air_front_0001.jpg
http://are-inc.org/frontsus/air_front_0002.jpg
http://are-inc.org/frontsus/air_front_0003.jpg
http://are-inc.org/frontsus/air_front_0004.jpg
It seems like the dual shock is the final solution. The last mounts for the a-arms are ready.
http://www.are-inc.org/frontsus/new_front_air_2.jpg
The only things that are missing now is the mounts for the shocks (they are now in position) and the mounts for the bags.
The guy who's designing it are missing some info regarding the bags so he can create a functioning air bag in the CAD program.
This for is for testing everything BEFORE he starts the production of the beam for my car. He probably will get the data he needs
from the manufactor of the bag real soon.
Gettin' there :)
http://www.are-inc.org/frontsus/new_front_3_b.jpg
Normal mode:
http://www.are-inc.org/frontsus/new_front_5.jpg
From the side in "slammed" position:
http://www.are-inc.org/frontsus/new_front_4.jpg
I will be able to "lay frame" with 22" wheels with this suspension, no worries with my 15" wheels then :D :D
That's just crazy!!! nice setup!
nice upgrade! should steer alot better too!
Got these rendrings today from the guy designing my new front suspension.
The wheels are 17" so imagine what it will be like with my 15's with 165/50 rubber ;)
Slammed 17":
http://www.are-inc.org/frontsus/17_up.jpg
"Offroad edition" 330mm ground clearence with 17s:
http://www.are-inc.org/frontsus/17_down.jpg
http://www.are-inc.org/frontsus/17_up_m.jpg
http://www.are-inc.org/frontsus/17_down_m.jpg
I also ordered some upgrade parts for the 'ride yesterday.
Digital display and sensor for all corners and tank:
http://vagner.jeje.je/bilder/albums/68_Type1/109218877_tp.jpg
9 button switchbox for controlling the 'ride:
http://www.airassisted.com/images/AVS_ARC-9Rocker_Switch_w-lo.jpg
8 x 3/8" Fast valves
http://www.airassisted.com/images/asco_8_pack.jpg
I also ordered new 3/8" air lines.
And my new front and rear tires arrived from Germany :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0182.sized.jpg
Front tires:
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0184.sized.jpg
The tires AND wheels are going to be modified before I install them ;)
I see that you are using Rod-ends on both sides of your front A-arms. Why is that?
(for buying them: http://www.rallydesign.co.uk/index.php?cPath=1113)
With the current setup you can align a lot, but it now is also quite easily to mis align everything and create a negative result if we look at the handling of your bug.
Where will the steering rack be mounted? That is also really important for the handling bit, if is is mounted in the wrong position you can get a lot of "bump steer".
I really like what you want to realize, I only would like the know if your designer also thought about that stuff.
I see that you are using Rod-ends on both sides of your front A-arms. Why is that?
(for buying them: http://www.rallydesign.co.uk/index.php?cPath=1113)
With the current setup you can align a lot, but it now is also quite easily to mis align everything and create a negative result if we look at the handling of your bug.
Where will the steering rack be mounted? That is also really important for the handling bit, if is is mounted in the wrong position you can get a lot of "bump steer".
I really like what you want to realize, I only would like the know if your designer also thought about that stuff.
He has everything under control. ;) Also those parts you mention.
He's working on the steering now, and it seems like it will not be much bumpsteer.
A little update.
100 Ft^ of FatMat is on its way from the states. Silence!!! :D
http://vagner.jeje.je/bilder/albums/68_Type1/rth4rjh.jpg
Yesterday I finally got a pair of original PopOuts =) Also in good condition.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0002_011.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0003_011.jpg
And tonight I got my new _W deck lid_
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0007_011.jpg
Modified by DrLaban at 12:02 AM 9-20-2008
Well, here are some pics... :)
Yesterday two shipments from the States arrived.
New airride controller, 8 fast valves, bigger/better fittings for the hole system, 3/8" air lines.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0026_003.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0028_004.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0029_003.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0034_002.jpg
White portawalls for the new rear tires...
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0036_002.jpg
...and for the front tires. Not much BLACK sidewall left ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0037_001.jpg
Received 100 square feet of FatMat today. This should be one quiet and HEAVY bug :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0001_020.jpg
Operation "Digital Gauge"
It is not easy to place a digital display in a car from 1968 without making it all look stupid.
After som testing and failing I found a solution and went for it.
First step:
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0003_013.sized.jpg
Then I had to find the right position for the display:
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0002_012.sized.jpg
This is what I had in mind:
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0004_014.sized.jpg
And after some cuting, grinding the final result was like this:
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0009_008.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0019_005.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0016_009.jpg
I am going to make a gasket under the front to get it in level with the trim.
The alu.front is also going to be polished to match the rest.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0020_004.jpg
love all the original ideas on this thing..
spending alo of money is one thing, but NOT making it look like everything else is the hard part....
Last week I tried on my new pre67 hood. Me liiiike!
The hood and the deck lid are going to be prepared for paint next weekend.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0001_023.jpg
I am also going to change this one next weekend...
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0001_024.sized.jpg
Earlier this week I also received some parts for my pop outs.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0003_014.jpg
..."snowflakes" =)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0004_016.jpg
But now... the BIG news of the week. I have now made an appoinment with my painter ;)
The body is prepared for paint next weekend and is delivered for paint the week after that, where it will stay for a couple of weeks.
I will then use this time to finish the modifications of the front suspension and changing the air lines.
It seems like the new suspension is delayed so I'm going to make the changes to my balljoint to make the car even lower.
I am also going to make some "mods" on my new tires and get them installed.
So guys.. wanna know what color I have choosen?? :laugh:
FLATT Savannah Beige, with bronze toned windows (all of them, including the wind screen)
All the primer red details are of course a keeper ;)
http://vagner.jeje.je/bilder/albums/68_Type1/theRestoRod_beige.jpg
More work done this weekend.
http://vagner.jeje.je/bilder/albums/68_Type1/Labi_008_sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/Labi_009_sized.jpg
The painter visited me saturday and had a look at the project.
He was very satisfied of the work so far. I will receive a quote next week.
Changed the front apron since I have changed the hood.
Now the apron is pre 67 =)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00001.sized.jpg
Perfect fit against the fenders. HEY!!! The car is on the ground! ;) hehe
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00004.sized.jpg
"The Mig" ;D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00015.sized.jpg
Two of my friends visited me today, and that ALWAYS ends up in more work for me. And here's the result...
Before:
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00018.sized.jpg
After:
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00022.sized.jpg
Result.. MUCH lower Cap!
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00024.sized.jpg
Stance :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00027.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00029.jpg
you sir,...... are INSANE!!, love it..
knarfmk1
28-10-2008, 09:11
Still a very cool project! keep it going!
Beetlefreak
28-10-2008, 12:36
Sickness... Bronze-toned windows is sure a very nice thing!!
Ahhh.. it is confirmed. The car is going to be painted 14. and 15. November :)
Ok, guys. Here's some low quality vids. Will make some better later ;)
Don't think of the squicky noises.. the body isn't boltet or adjusted =)
http://www.youtube.com/watch?v=AKGl6HVMJTo
http://www.youtube.com/watch?v=dYPD2yutGqw
http://www.youtube.com/watch?v=jiByJcaHWJc
http://www.youtube.com/watch?v=kyP7HCvB-cM
Well guys, this is a week that I have waited for a long long time. This weekend the car is going into the paint booth =)
I am using these last days for the last minute job. Today I have stripped the bonnet and the hatch. First I used a paint stripper.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00033.jpg
After some minutes it looked like this..
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00042.jpg
And some hours later working with the grinder, it looked like this..
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00052.sized.jpg
Tomorrow I am going to "shoot" primer, and wednesday I'll shoot the last layer with füller.
I also went to the painter tonight and picked up the paint sample. The paint is so incredible flatt!! =) JUST AS I WANTED!!
This is taken with blitz on, and it is impossible to get ANY reflections at all from it ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00053.jpg
Modified by DrLaban at 9:52 PM 11-10-2008
ooohh, i think i'm gonna like this
Two days to go ;)
Last minute cleaning. The bonnet...
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00081.jpg
Almost there, just some more welding and grinding
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00087.jpg
First layer of primer...
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00089.jpg
Ahhh.... MUCH better :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00090.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00093.jpg
Saturday morning the body is dropped of at the painter. Sunday I'll pick it up again ;)
i joined this forum the other day after spending most of the day reading this thread.....GREAT build up please more updates :) your pics and info are a really great source of information to a newbie like me.
Last minute mods before paint.. :D
Removed the holes for the original rear lamps. New holes for the old snowflakes will be made later..
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00128.jpg
More cleaning. Only the rear mirror will be there when I'm finished..
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00129.jpg
Interior light..cleaned ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00134.jpg
Cleaning of the stereo location in progress..
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00107.jpg
More to come... stay tuned :)
still not painted huh? well it gives you time to finish it off...... shaving wise...
PoloCoupeGT
26-11-2008, 16:33
Nais!! Good job!
still not painted huh? well it gives you time to finish it off...... shaving wise...
Nope :( The painter had to move the date for the paint job again.
The result was the additional cleaning inside ;) hehe But next friday the body is delivered for paint.
Nais!! Good job!
Thanx man :)
TheLittle
27-11-2008, 00:09
perfect bug ,looking forward to see more
Well guys, I MADE IT!
The clock is now 02:30 @ night and the car is ready for paint tomorrow.
I entered the garage with fever tonight and I can't say that I feel any better after 9 hours in the garage :(
DAMN TIRED!! I have to get in bed now, 3 hours of sleep, then it's work again :(
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00160.sized.jpg
Well, pics from tonight
RestoRod "The body"
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00152.sized.jpg
Finally DONE!
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00154.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00164.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00168.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00169.sized.jpg
GOOD NIGHT!!! ;)
knarfmk1
05-12-2008, 09:13
Good Job! Now go get some sleep!
Well, the car is now in the hands of my painters.
I have to admit that I get a bit proud when I get cred for my work with the body from the painter. All these hours spent... I got paid today :)
Not much for them to fix, just some minor dents that I did not see at all. :)
The painter promised me some pics on my mobile when it starts to look like a car again.
So maybe there will be some sneaks before sunday ;
First photo from the painter. Ready primed :D
http://vagner.jeje.je/bilder/albums/68_Type1/Billede031.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/Billede034.jpg
It's going to be a nice ride!!
But did you glued the white walls to the tires?
It's going to be a nice ride!!
But did you glued the white walls to the tires?
Nope, but I am changing to some other walls on the new tires. These ones are to high.
Housten, we have TOUCHDOWN! :)
I didn't manage to keep out of the garage last night. After some cutting ang welding I managed to get the front 30mm lower :)
I have trimmed the lower parts of the suspension and the frame head.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00172.sized.jpg
LOW! But I think I have to was the pan soon :(
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00174.sized.jpg
Paint!!
Well, it is done :) Went to the painter to pick up all the loose parts today, and I saw the car for the first time.
PURE PORN! The color and the flatnes is just RIGHT :D :D
But enough talk.. here's the pics
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0001_025.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0003_015.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0004_017.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0005_011.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0006_010.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0007_012.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0008_015.jpg
One of my kids got her room filled with parts... :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0011_011.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0013_006.jpg
oooooooohhhh, love the color!!
Patrick86
06-12-2008, 15:32
Wonderfull! :)
johan mk1
06-12-2008, 16:24
nice :thumbup: :thumbup: :spankit:
Finally it's back :) I am VERY satisfied with the result :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0005_012.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_0001_026.jpg
The inner roof and under the bonnet is not finished as you can see. But I got some scary plans ;)
it looks already nice!
I'm curious about the rest.
I love the colour!
Hurry up, looks like you need the snowplow there :)
what size air line and valves are you using?
Love this build colour is very sweet...
Awesome color!!! Really nice project you've got going on here....
I have to finish some stuff inside the house before x-mas before I start putting it back together, but I am a weak man, so I had to do something.. ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00179.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00183.jpg
what size air line and valves are you using?
Love this build colour is very sweet...
I am going to use 3/8" lines and valves. The old setup which is in the car now is only 1/4" lines and manual air switches, no valves at all.
I just had to do something tonight... :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00194.jpg
Added some chrome to the air intake under the window to add a contrast to the flat paint.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00185.jpg
the flat and chrome combo works sooooooo well... still in love with this project
.. :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00212.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00215.jpg
Got some more done last night :)
Doors
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00228.jpg
Tried on some of the trim
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00230.jpg
And finally the hood
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00232.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00244.jpg
happy new year !! looks great, more please :)
:( where did everyone go?
maniacmark
21-01-2009, 12:24
I like it very much, except for the wheels. They are a lite bit too much out of straight position in my opinion.
But in total it looks very nice
Keep up the good work
PoloCoupeGT
21-01-2009, 14:47
No more updates??? This is a nice project to follow!
yeh it's about time for an update..
I like it very much, except for the wheels. They are a lite bit too much out of straight position in my opinion.
But in total it looks very nice
Keep up the good work
Thanx :)
They are supposed to be "a bit too much". I want the car to look kinda "Cartoonish" ;)
But things will happen during this spring. So follow the project and see if you like the final product. :)
Guys!
Long time, no see. Well, I'm back in business again.
Had a shitload of things to do at work since Christmas. No garage time at all. :(
But now I'm back in the garage again. Last weekend I did some "things" which I won't reveal yet ;)
Yesterday I helped one of my friends out with his beetle, installing popouts.
Actually I am moving my project to a bigger garage after the easter holidays.
I'm going to share garage with 6 other guys. REALLY lookin' forward to this. :D
Tonight I'll be in the garage, so there will be some informative updates after that :)
Last night I got some good hours in the garage.
I am moving the car to a bigger garage after the easter holidays so I'm finishing up the "dirty work" in my own garage.
I have modified my frontbumper and brackets to make it fit as perfect (and close) as possible.
After 2,5 hours I was pretty pleased. The bumper is also moved 17-18mm down.
I am now going to weld all bolts from the back and clean the frontside of the bumper for holes.
Also played a little with the location of my new licenseplate. I think it will end up under the bumper. Then I don't "mess up" the bumper with to many "things".
Next up is the rear bumper.. ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00261_Edit.sized.jpg
And now... a little suprise for you. My pinstriped dash :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00276.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00279.jpg
That's all for now.
PoloCoupeGT
31-03-2009, 11:07
Very Nice!! Did you do the pinstriping yourself?
Actually, the pinstripe is made out of a special vinyl, which looks scary real :)
Got it made in the US. Was pretty expensive, but it turned out real good :D
And for the question, I mounted it myself ;) hehe
The reason I didn't get it done with real paint is that I was not 100% sure which one I should choose ( I bought 3 different stripes).
And I have to paint the hole car inside if I deside to change it later. It is impossible to paint just a part of the dash because of the flatt paint.
looks nice indeed.
I hope you've got now time enough to finish your bug, because i'm pretty curious off the result . :D
More work done tonight :)
I started on the rear bumper. Like in the front, I want the bumper to follow the shape of the car better.
First I make a slice for each inch. I only slice the bottom of the bumper.
Then I shape it bye bending it carefully until I got the shape I want. Then I weld all the slices.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00281.jpg
Then after a couple of hours things look like this. Much much better. This is the way it SHOULD have been made ;)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00293.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00290.jpg
I still got to modify the brackets to lower the rear bumper as well, but I'll do that later this week.
I got something else up my sleeve reagarding the rear bumper, so stay tuned ;)
i really like those bumpers
i really like those bumpers
Then you'll have something to look forward to when I'm finished modifying them ;)
This is just the start :D
Show us more mate.... Love this project...!!!!
greetz Lars
This weekend I have completed the modification of the ASS. "I love big butts" so I wanted to make one reeeal fat one.
The SEBRING exhaust didn't fit perfectly so I had to re-weld the exits. I also changed to pipes to 2,5".
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00369.sized.jpg
Made some half moons in the blade
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00371.sized.jpg
So after a LOT of meaturements, grinding, calculation and brainstorming things looked like this.
The pipes nicely dives into the rear bumper, just the way I wanted.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00373.sized.jpg
One BAD ass! ;) :D
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00375.sized.jpg
I have changed the shape of the bumper blade, lowered it, raised the exhaust exits, shorten the bumper brackets and shorten the pipes.
like many other things on this car that MUST be a first for a beetle..
I am still modifying my front bumper and brackets. Here's a little "sneak" of what's goin' on.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00386.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00379.jpg
Bumper is now in the perfect height and distance from the front. I have also modified the fog lamps (that I used on my old Galf Cab project) so they don't need a foot or bracket.
I also went and blasted/primed some parts last night.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00396_Edit.jpg
Just now I am putting all the new air parts together. This is what you need for controlling one corner of the car. In other words you need 4 of this rig to controll all corners.
http://vagner.jeje.je/bilder/albums/68_Type1/web_001.sized.jpg
And some more "sneaking" ;)
http://vagner.jeje.je/bilder/albums/68_Type1/lampe.sized.jpg
Started the upgrade of the air ride today. This should give the system enough air flow. Upgrading from 1/4" to 3/8".
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00412.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00413.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00415.sized.jpg
Since the 5 gallon tank is mounted behind the gas tank I had to modify the tanks foot.
It looked like this before I started cuting it:
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00416.sized.jpg
And after some welding it looked like this:
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00418.sized.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00421.sized.jpg
Will continue the work with the upgrade tomorrow. :)
knarfmk1
25-04-2009, 17:08
nice work!
Today I started with the MDF floor which will support all the air management parts.
Started up making a frame under the gas tank. All the other panels will be "connected" to this frame and in that way locked to the body of the car.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00426.sized.jpg
Then I made two more panels, one for the air parts and one for the audio amp.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00429.sized.jpg
This is the layout, so far. I think there will be some small changes on the location of the air parts.
Now I'm going to make some neat panels which makes it possible to hide cables, air lines etc.
Tomorrow I am also going to make the box for my subwoofer(s), so I can get ride of the MDF-board inside my garage.
Stay tuned! :)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00433.sized.jpg
Another sunny day in Oslo. :) A day spent in/outside the garage ;)
Starting to look like a car again. New seats and panels in dark red. Looks great againts the flat savannah beige paint
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00441.jpg
Box for the subwoofers under construction. 2 x RF 10" are going inside this box.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00445.jpg
Almost done. The inner walls between the woofers are missing in this picture. Each woofer have its own encloser.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00449.jpg
Finito :) Haven't decided what material I'm gonna use on the box. I want it to look original and not look like a sub. So if someone got some pics of a original "plate" behind the rear seat, please post it her.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00461.jpg
You mean like this:
http://img.photobucket.com/albums/v65/Gerk83/Volkswagen/Cars/61-er%20Beryll/2009/090227-01.jpg
http://www.volksforum.com/forum/showthread.php?t=41893&page=3&pp=20
You mean like this:
http://img.photobucket.com/albums/v65/Gerk83/Volkswagen/Cars/61-er%20Beryll/2009/090227-01.jpg
http://www.volksforum.com/forum/showthread.php?t=41893&page=3&pp=20
Yes, is that a original one? Never seen one like that.
as you can see in the link Ruben posted, it's an old Kamei piece
Beetlefreak
27-04-2009, 15:55
Yes, is that a original one? Never seen one like that.
Yes it is! It's called "Parcel Shelf" and made by Kamei. They are made in red, black and white.
It's a 60's product as far as I know. But the '67 one is different, it has a knob that matches the '67 dashboard:
http://i239.photobucket.com/albums/ff318/Split52/divers/PICT0733.jpg
Got all my fittings today. And then I was able to finish the valve/tank setup.
Pretty pleased with the result. Tonight everything is going in to the car, and hopefully soon the car will be on the wheels again.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_2487.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_2489.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_2492.jpg
More done tonight, this is going the right way so far :)
Almost finished "all" the electrical stuff in the car. Fuse panel, lights etc.
I also gave the tank for the air ride a "makeover". So after a couple of hours, it looked like this:
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_2502.jpg
is that a sticker? or are you the best pinstriper ever??
is that a sticker? or are you the best pinstriper ever??
It's a special vinyl decal bought in the states. Looks almost real.. kinda scary actually :)
I made a small board under the tank to easy the installation into the car.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00470.jpg
Then I don't have to f**k around under the tank to take it in and out. The bolts are VERY tight under it.
Installed :) I also installed the modules for air management and remote controll (pop doors)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00475.jpg
Not much space, but enough :)
My remote got 3 channels, so I'm going to use the 3. channel for slamming my ride using the remote.
The plan for tomorrow is to blast my bumper blades...
The air management is now functional :)
Tthe 9-switch box. Enables all kind of control. One corner, one side, both front, both rear and all corners.
http://www.youtube.com/watch?v=NQNxodEhIGc&feature=channel
I can also slam and raise using the remote for the shaved doors.
http://www.youtube.com/watch?v=_2WN77klR3E&feature=channel
A little update from the last days. Got a lot done and here's some of it.
Blasted and primed my wheels. Next is bondo and new paint
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00496.sized.jpg
Also got my red bands..
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00500.sized.jpg
Modified and fitted my stone guards (ROBRI repro's) A helluva job to get them fitted ok. But after some hours they where on.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00502.sized.jpg
More to come this weekend :)
;) Flat white....
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00505.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00506.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00511.sized.jpg
don't know why, must be the plastered walls or something, or the light.
But i'm getting a very mediterrainian feel from that pic :lmao:
don't know why, must be the plastered walls or something, or the light.
But i'm getting a very mediterrainian feel from that pic :lmao:
hehehe.. well it's only the wall down to my basement at home.
Sunday in the garage...
Pop outs installed:
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00515.sized.jpg
Painted and assembled the head lights.
http://vagner.jeje.je/bilder/albums/68_Type1/DSC00517.sized.jpg
Pictures says more than words... (Haven't installed the red bands in front yet)
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_2699.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_2704.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_2720.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_2719.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_2721.jpg
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_2722.jpg
Jan-Jelle
11-05-2009, 22:02
WOW!! That's awesome!
And if I understand it correctly this is the highest position of the airride?
:D Looks awesome!!! Like the wheels etc.
the pipes in the rear look sooooo menacing combined with the stance. :thumbup:
And if I understand it correctly this is the highest position of the airride?
:D Looks awesome!!! Like the wheels etc.
hehehe.. yes it it. I just have to digg a hole to slam it.
Actually the car hits the ground now before the bags reaches the bottom.
Ok, let me reveal one more secret.
Take this...
http://vagner.jeje.je/bilder/albums/68_Type1/lampe.sized.jpg
..combined with this
http://vagner.jeje.je/bilder/albums/68_Type1/DSC_2722.jpg
.. and the keyword "Type 2"
Then guess what will happend to the US-bumpers...... ;)
vBulletin v3.0.12, Copyright ©2000-2024, Jelsoft Enterprises Ltd.