Volksforum.com

Go Back   Volksforum.com > Nederlands > Techniek en Tuning Watergekoeld > Algemeen
User Name
Password
Home FAQ Register Members List Calendar Today's Posts





Reply
 
Thread Tools Search this Thread
  #1  
Old 11-11-2016, 19:34
knarfmk1's Avatar
knarfmk1 knarfmk1 is offline
Shifting Up! DSG7 Donateur Less talk, more action!
 
Join Date: Jun 2005
Posts: 4,041
Default VW-Tool T10017 te huur of te leen gevraagd

Hoi,

ik wil van mijn motor de krukas keerring plaatsen:



maar hiervoor heb je een special tool nodig van VW, Tool T10017:



heeft iemand deze misschien te leen of weet iemand of ik deze ergens kan huren? Kopen kost 200,- en dat is me toch wat teveel voor één keer..

Liefst ergens in Noord-Holland.

alvast bedankt!

Last edited by knarfmk1 : 12-11-2016 at 19:01.
Reply With Quote
  #2  
Old 12-11-2016, 13:01
Scirocco_1600's Avatar
Scirocco_1600 Scirocco_1600 is offline
Forum junkie
 
Join Date: Jun 2009
Posts: 1,989
Default

Ik heb deze tool nog nooit gebruikt ... ik gebruik een pvc buis met dezelfde diameter als de keuring en ik tik ze er altijd voorzichtjes in met een hamer , nog nooit problemen mee gehad

Bij het zien van u nieuwe foto is mijn mening niet van toepassing

Last edited by Scirocco_1600 : 12-11-2016 at 19:18.
Reply With Quote
  #3  
Old 12-11-2016, 18:10
ar1g3's Avatar
ar1g3 ar1g3 is offline
Volksforum Aandeelhouder
 
Join Date: Nov 2012
Posts: 1,989
Default

Je kan die keering normaal bij vw ook met het huis kopen, hoef je niets erin te duwen. Is ietsje duurder maar valt best mee qua prijs normaal!
__________________
'88 Golf 2 1.8 GTI 16v PL(project)
'01 Passat B5.5 1.9TDI PD
'95 Passat b4 1.9 TD (RIP)

"Cornering perfectly is like bringing a woman to climax.” - Jackie Stewart
Reply With Quote
  #4  
Old 12-11-2016, 18:52
vento tdi vento tdi is offline
Forum junkie
 
Join Date: Nov 2004
Posts: 1,510
Default

De tool die jij bedoeld is voor krukaskeerringen met krukaspositiesensor.

De versie zonder sensor zet je er zo in , de febi keerring die ik zojuist vv heb heeft er zoals de foto een witte plastic ring bij zitten voor de montage.
Reply With Quote
  #5  
Old 12-11-2016, 18:55
knarfmk1's Avatar
knarfmk1 knarfmk1 is offline
Shifting Up! DSG7 Donateur Less talk, more action!
 
Join Date: Jun 2005
Posts: 4,041
Default

klopt ik heb er ook een met ring voor de krukaspositiesensor, plaatje klopt idd niet
Reply With Quote
  #6  
Old 12-11-2016, 19:00
knarfmk1's Avatar
knarfmk1 knarfmk1 is offline
Shifting Up! DSG7 Donateur Less talk, more action!
 
Join Date: Jun 2005
Posts: 4,041
Default

dit is m:
Reply With Quote
  #7  
Old 18-11-2016, 11:11
knarfmk1's Avatar
knarfmk1 knarfmk1 is offline
Shifting Up! DSG7 Donateur Less talk, more action!
 
Join Date: Jun 2005
Posts: 4,041
Default

Niemand die me hieraan kan helpen of in de goede richting kan sturen?
Reply With Quote
  #8  
Old 18-11-2016, 12:25
MelG60 MelG60 is offline
Postwhore
 
Join Date: Dec 2003
Posts: 1,448
Default

Wat voor ecu ga je rijden?
__________________
1991 Golf GTI 20v 4x4 677pk
1989 Golf 20v turbo 4motion
1990 Golf GTI G60
1990 Golf GTI 16vG60
1991 Golf GTI G60
1991 Golf GTI Edition one G60
1983 Golf GTI 16vG60
1983 Golf GTI G60
2000 Audi S3
Reply With Quote
  #9  
Old 18-11-2016, 14:01
knarfmk1's Avatar
knarfmk1 knarfmk1 is offline
Shifting Up! DSG7 Donateur Less talk, more action!
 
Join Date: Jun 2005
Posts: 4,041
Default

Omex 600 of DTA S40,

zouden als het goed is met deze sensor overweg kunnen.
Reply With Quote
  #10  
Old 19-11-2016, 00:46
MelG60 MelG60 is offline
Postwhore
 
Join Date: Dec 2003
Posts: 1,448
Default

als je voor de S40 gaat (zou ik doen of liever nog de S60) dan maakt de exacte uitsparing positie niet uit want je kan hem 'opzoeken' met de software. Ik zou de ring zo plaatsen dat de uitsparing ongeveer 80 graden voor btdc staat (vanaf sensorpositie gezien)
__________________
1991 Golf GTI 20v 4x4 677pk
1989 Golf 20v turbo 4motion
1990 Golf GTI G60
1990 Golf GTI 16vG60
1991 Golf GTI G60
1991 Golf GTI Edition one G60
1983 Golf GTI 16vG60
1983 Golf GTI G60
2000 Audi S3
Reply With Quote
  #11  
Old 19-11-2016, 06:20
Black Devil's Avatar
Black Devil Black Devil is offline
Triple Action Donor - Niet fantaseren maar construeren
 
Join Date: Dec 2003
Posts: 4,452
Default

Kerel, app mijn even 06-41843898
__________________
Golf 3 VR6 3.0 Compressor
Golf 1 1.3 Carburateurs
Corrado VR6
Dailys:
Passat W8 Station & T4 California
Reply With Quote
  #12  
Old 19-11-2016, 13:43
knarfmk1's Avatar
knarfmk1 knarfmk1 is offline
Shifting Up! DSG7 Donateur Less talk, more action!
 
Join Date: Jun 2005
Posts: 4,041
Default

Met dank aan Black_Devil issie gemonteerd!




Quote:
Originally Posted by MelG60
als je voor de S40 gaat (zou ik doen of liever nog de S60) dan maakt de exacte uitsparing positie niet uit want je kan hem 'opzoeken' met de software. Ik zou de ring zo plaatsen dat de uitsparing ongeveer 80 graden voor btdc staat (vanaf sensorpositie gezien)


bedankt voor je antwoord, klopt, maar zo zit de ring er tenminste ook recht en met de juiste speling op

Last edited by knarfmk1 : 19-11-2016 at 14:08.
Reply With Quote
  #13  
Old 27-11-2016, 10:50
Hight's Avatar
Hight Hight is offline
Volksforum QUATTRO Donor
 
Join Date: Dec 2007
Posts: 1,355
Default

zo te zien past dit ook op een 'bigblock'?
__________________
1984 VW Golf mk1 GTI Pirelli Schrick turbo

2000 Seat Ibiza 6k2 1.6 8v
Reply With Quote
  #14  
Old 27-11-2016, 11:43
knarfmk1's Avatar
knarfmk1 knarfmk1 is offline
Shifting Up! DSG7 Donateur Less talk, more action!
 
Join Date: Jun 2005
Posts: 4,041
Default

ja als het goed is wel, de nieuwere blokken iig
Reply With Quote
  #15  
Old 14-02-2017, 17:30
yuli's Avatar
yuli yuli is offline
Forum junkie
 
Join Date: Nov 2005
Posts: 1,846
Default

Ik kwam dit topic van Frank tegen en wil deze graag hergebruiken.

Ik zit met hetzelfde probleem maar dan voor een 16v KR. Ik heb deze dichting liggen en dat past ook op een KR maar 1 boutje (Links boven) komt dan niet uit.
Dit is op te lossen door of gaatje boren tappen, of een dikkere ring gebruiken (boutje zit er dan naast, niet de schoonheidsoplossing).

Wanneer je een 1.4 TSI SEAL besteld (motorcode CAXA bijvoorbeeld) deze komt 1 op 1 over voor het monteren op een KR. Alleen mijn ervaring is dat hier weer moeilijk een krukassensor is te vinden met draad die hier in past.

Is er iemand regio Zuid-Holland die het gereedschap heeft om deze te monteren of mij hiermee kan helpen?
__________________
VW T3 - 1982 - 16v KR
VW Golf 1 - 1983 - PG G60
VW Corrado - 1989 - PG G60
VW Golf 1 - 1994 - Cabby Acapulco 2H

Last edited by yuli : 21-02-2017 at 15:17.
Reply With Quote
  #16  
Old 21-02-2017, 15:12
yuli's Avatar
yuli yuli is offline
Forum junkie
 
Join Date: Nov 2005
Posts: 1,846
Default

Ik kon niemand vinden binnen mijn kennissen kring die deze tool heeft. Daarnaast een aantal lokale garages afgebeld maar die geven aan dit gereedschap niet te hebben omdat de nieuwe teflon seals haast niet kapot gaan. Dus die hebben dat nog niet nodig gehad.
__________________
VW T3 - 1982 - 16v KR
VW Golf 1 - 1983 - PG G60
VW Corrado - 1989 - PG G60
VW Golf 1 - 1994 - Cabby Acapulco 2H

Last edited by yuli : 02-03-2017 at 14:07.
Reply With Quote
  #17  
Old 21-02-2017, 17:33
R-oy R-oy is offline
VW Fanatic
 
Join Date: Jan 2013
Posts: 313
Default

Heeft deze tool juist niet te maken met het afstellen de correcte afstand van de seal?
Reply With Quote
  #18  
Old 23-02-2017, 12:15
yuli's Avatar
yuli yuli is offline
Forum junkie
 
Join Date: Nov 2005
Posts: 1,846
Default

Quote:
Originally Posted by R-oy
Heeft deze tool juist niet te maken met het afstellen de correcte afstand van de seal?


Ja, o.a voor de triggerwheel maar niet alleen dat. Het is ook een echt een montage hulpmiddel. Ik heb al een beetje spijt van dat ik er aan ben begonnen. Want kan niet verder zit nu op die tool te wachten..

Zonder die tool met alleen de plastic ring is het een beetje op goed geluk lees ik. Zit niet te wachten op een olie lekkage daar als straks de bak er achter zit want is echt een h*eren klus dan.

Wat ik weet;
- motor op bdp
- Alles goed schoonmaken
- Beste is olie pan eraf
- Droog monteren (geen olie of vet gebruiken)
- Klein beetje sealant gebruiken onder in de hoeken
- Na montage minimaal 4 uur wachten

Het beste filmpje wat ik tot nu toe kon vinden is van Elring;


En deze komt op de tweede plek;
__________________
VW T3 - 1982 - 16v KR
VW Golf 1 - 1983 - PG G60
VW Corrado - 1989 - PG G60
VW Golf 1 - 1994 - Cabby Acapulco 2H
Reply With Quote
  #19  
Old 01-04-2017, 15:13
Hight's Avatar
Hight Hight is offline
Volksforum QUATTRO Donor
 
Join Date: Dec 2007
Posts: 1,355
Default

kan iemand mij aan de onderdeel nummmers helpen voor zowel, keerring compleet , triggerwheel en sensor?

tenven is het mogelijk dit om mn DX te bouwen?

mvg MIke
__________________
1984 VW Golf mk1 GTI Pirelli Schrick turbo

2000 Seat Ibiza 6k2 1.6 8v
Reply With Quote
  #20  
Old 03-04-2017, 07:54
knarfmk1's Avatar
knarfmk1 knarfmk1 is offline
Shifting Up! DSG7 Donateur Less talk, more action!
 
Join Date: Jun 2005
Posts: 4,041
Default

Voor het Polo blok (ARC) was dit het nummer: 030103171K
Dat is keering incl. triggerwheel.
Krukassensor voor dit blok is: 030957147G

en dit topic van Yuli kan je ook helpen: http://www.volksforum.com/forum/showthread.php?t=139777
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump




All times are GMT +1. The time now is 20:11.


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
All rights reserved, Volksforum