09-12-2015, 01:25
|
 |
Forum Regular
|
|
Join Date: Apr 2015
Posts: 131
|
|
The wiring harness is finished and installed.
The steering wheel is finished up. I called the local upholstery shops, so far one returned call out of 3. My one response will wrap it in leather for $120. It is a lot of work, but not sure how good that price is. Waiting to hear from the other two. I removed the quick release hub, as it was way too sloppy. Also welded in a mounting plate to bolt on a spinner and avoid the typical lousy fit.
Also finished up the rear sway bar install. I was having a bit of a clearance issue with the bar and the gas tank but solved it by modifying some factory sway bar link bolts. They have a very thin but wide head but had to machine off a large shoulder to fit my application.
Original on the left, modified on the right.
In place
http://www.BenModified.com
|